کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10620477 | 988631 | 2012 | 10 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Interactions between mechanically generated defects and corrosion phenomena of Zr-based bulk metallic glasses
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
Using the example of a Zr-Ti-Al-Cu-Ni bulk metallic glass with an ex situ approach, two aspects were studied: (i) the effects of pre-formed corrosion pits on the room temperature deformation behaviour, and (ii) the effect of mechanically generated defects on the local corrosion susceptibility. For the latter, Vickers micro-indents generated with different loads were also employed as model defects. It is revealed that pre-formed corrosion pits act as favourable surface sites to which shear bands are linked and most likely nucleate, which leads to a slight reduction in the maximum compression stress. Further, mechanically generated defects have to be considered as critical weak points at a glassy sample surface which can act as preferential sites for local corrosion initiation and propagation. Local chemical and structural changes due to the formation of shear bands as a response to mechanical load are discussed as possible reasons for this. For potential high-load applications of bulk metallic glasses this interaction must be considered as an important lifetime limiting aspect.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Acta Materialia - Volume 60, Issue 5, March 2012, Pages 2300-2309
Journal: Acta Materialia - Volume 60, Issue 5, March 2012, Pages 2300-2309
نویسندگان
A. Gebert, P.F. Gostin, M. Uhlemann, J. Eckert, L. Schultz,