کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1664448 | 1518011 | 2016 | 6 صفحه PDF | دانلود رایگان |
• The role of Ga in CIGS solar cells with different thickness is comparatively studied.
• Effect of Ga on the material properties of 1 μm and 2 μm films is totally different.
• The minimum band gap of thinned films is more sensitive to variation of Ga/(Ga + In).
• Efficiency of thinned solar cells increases more significantly with Ga increasing.
Cu(In, Ga)Se2 (CIGS) thin films with thickness of 1 μm and 2 μm are prepared by co-evaporation process, and the different Ga/(Ga + In) are achieved by varying the temperature of Ga source. The morphology, structure, minimum band gap, and performance of solar cells are comparatively studied. As Ga/(Ga + In) increases, little changes can be observed in the crystal quality of 1 μm CIGS films, while the grain size of 2 μm films decreases significantly. (112) diffraction peak intensities of the 1 μm and 2 μm films decrease and increase, respectively. In the case of the same Ga/(Ga + In), the minimum band gap values of 1 μm films are larger than that of 2 μm films, and the difference becomes large with Ga/(Ga + In) increasing. The minimum band gap values of 1 μm films are more sensitive to variation of the Ga/(Ga + In). As Ga/(Ga + In) increases, a more improvement of the efficiency of solar cells with thickness of 1 μm is obtained due to the large enhancement of the open-circuit voltage, and the efficiency reaches the maximum value when Ga/(Ga + In) is about 0.37.
Journal: Thin Solid Films - Volume 598, 1 January 2016, Pages 189–194