کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1667397 | 1008850 | 2012 | 4 صفحه PDF | دانلود رایگان |
This paper reports the electrochemical synthesis and characterization of one dimensional hard magnetic CoPtP nanowires. Three electrode potentiostatic electrochemical technique was used to deposit nanowires into a nanoporous track-etched polycarbonate membrane with a nominal pore diameter 50 nm and thickness around 6–9 μm. The room temperature electrolyte used for the deposition of nanowires consists of 60 g/lt CoSO47H2O, 4.1 g/lt H2PtCl6, 4.5 g/lt NaHPO2 and 25 g/lt B(OH)3. The structural morphology was observed by scanning electron microscope and transmission electron microscope. The magnetic property of the nanowires was measured by vibrating sample magnetometer before removing the template. The coercive fields were measured to be 143 kA m− 1 and 103 kA m− 1 for parallel (H║) and perpendicular to the nanowire axis, respectively. The higher coercivity value for H║ indicating nanowires' easy magnetization direction lies along the nanowires' axis. The average composition of the CoPtP nanowires was determined by electron dispersive spectroscopy and the crystallinity was measured by X-ray diffractometer.
► CoPtP hard magnetic nanowires are synthesized by electrochemical deposition.
► The synthesized magnetic nanowires are an average of 6 μm in length.
► Coercivity of nanowires is 143 kA m− 1 when the field is parallel to nanowire axis.
► The magnetization direction of the nanowires lies along the nanowire's axis.
Journal: Thin Solid Films - Volume 520, Issue 17, 30 June 2012, Pages 5508–5511