Mechanical integrity analysis of multilayer insulator coatings on flexible steel substrates

The cohesive and adhesive properties, and related critical radius of curvature of thin multilayer insulator coatings on a 152 μm thick flexible steel substrate were investigated using tensile experiments carried out in-situ in an optical microscope. This method was found to be well adapted for the two types of coatings studied: SiO2 single layers with different thickness and SiO2/SiNx/polyimide stacks. Special attention was paid to the influence of surface roughness and yielding of the steel substrate. Coating delamination and spallation was observed at low strain in case of SiO2 coatings on unpolished steel, resulting from roughness-induced stress concentrations and slippage of grain boundaries. Polishing the steel substrate, or using a polyimide interlayer, was found to be useful to avoid premature delamination of the layers. In all investigated cases, a critical radius of curvature for layer damage of approximately 5 mm was found.