کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
210602 | 461718 | 2010 | 11 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Dimensional analysis for assessing the performance of electrostatic precipitators Dimensional analysis for assessing the performance of electrostatic precipitators](/preview/png/210602.png)
Electrostatic precipitators (ESP) are widely used in industry today and much research has been carried out during the last decades. Dimensional analysis (DA) allows to reduce the number of parameters necessary for defining the ESP performance and provides a reliable scaling-up of the desired operating conditions from the pilot-scale to full-scale plant (based on the invariance of the pi-space). Likewise, DA gives a consistent extrapolation within the range covered by dimensionless number and a greater flexibility in choice of parameters. DA together with similarity analysis is presented in this work in order to obtain a functional dependence between a target number and a set of few dimensionless numbers. The target selected has been the penetration, i.e., the ratio of particle dust concentration at the outlet of the ESP (Co) and that at the inlet of the ESP (Ci). The results can be valuable to assess the data from ESP of different operating characteristics, under geometric, electrical, fluid dynamics and electro-hydrodynamics similarity. Thus, as a consequence of these analyses, several quite reduced models have been formulated theoretically and later tested and validated with experimental data obtained in a pilot ESP in order to show an application of the study. Four models have been fitted by linear regression, resulting unsatisfactory. However, two additional models fitted by non-linear regression predict values of particle removal efficiency that agrees well with the experimental data. Thus, this paper is focused towards dimensional analysis in ESP model building, showing both the reduction in effort and more effective modeling that can result.
Journal: Fuel Processing Technology - Volume 91, Issue 12, December 2010, Pages 1783–1793