Effect of strata properties and panel widths on chock performance

The selection of optimum chock (support) capacity is very crucial for a successful longwall mining. The selection of chock capacity depends on the site-specific geotechnical parameters, constraints and longwall panel geometry, which are generally not known in detail in priority. Hence, based on the field and laboratory data, various possible combinations should be analyzed to cater for the unforeseeable mining conditions. This paper discusses the use of numerical model for selecting an appropriate chock capacity based on the site-specific geological and geotechnical information and longwall panel geometry. The fracture mechanisms of immediate and main roofs are also discussed for various panel widths and support capacities. For the models considered, the chock convergence is predicted to increase by about 33% due to the increase in face width from 100 to 260 m. Similarly, the massive roof strata are found to yield higher chock convergence compared to bedded strata.