Experimental synthesis of seismic horizontal free-field motion of soil in finite-domain simulations with absorbing boundary

In this paper, a fundamental assessment of the method of physical wave-absorbing boundary and centrifuge modeling is presented in the context of experimental simulations of seismic free-field ground motion. Focusing on the characteristics of a sand stratum, a series of seismic tests on models of uniform density and a large width-to-depth ratio with Duxseal as the side boundary were performed using an in-box shake-table system. By means of the transfer function approach in the frequency domain, the complex three-dimensional nature of the dynamic response of the finite soil model with the boundary treatment is demonstrated in terms of its variable resonant frequency distribution at different g-levels. Apart from being helpful in quantifying the difficulty in interpreting the finite-domain response simulations using one-dimensional theories or homogenized representations, the measured data substantiates the need and usefulness of coupling the Duxseal boundary approach with a three-dimensional elastodynamic synthesis. With the aid of a corresponding boundary element implementation, the feasibility of identifying the soil's in-flight shear modulus variation, Poisson's ratio and horizontal-to-vertical earth pressure ratio from the centrifuge model's free-field measurements is also explored.

► Fundamental issues of seismic free-field simulation by physical absorbing-boundary discussed.
► A set of viscoelastic continuum material parameters for Duxseal's modeling given.
► Limitations of 1-D homogeneous and inhomogeneous models for centrifuge setting demonstrated.
► A 3-D elastodynamic model is developed for a proper synthesis of finite-domain experimental data.
► Intrinsic soil parameters and stress condition identifiable from pure free-field measurements.