Scaling of response spectrum and duration for aftershocks

Aftershocks have the potential to cause collapse of a structure that has been already damaged by the preceding main shock. Seismic safety of a structure should therefore be ascertained through a damage analysis using the anticipated main shock and few larger-aftershock motions. Simulation of aftershock motions needs characterization of the seismic hazard due to aftershocks, and therefore it will be useful to develop a conditional scaling model that can predict the response spectrum of an anticipated aftershock motion consistent with the design spectrum of the main shock motion anticipated at the same station. In this study an attempt is made to develop a conditional scaling model for the pseudo spectral velocity spectrum via linear regression analysis on the aftershock and main shock recordings for the 1999 Chi–Chi earthquake. It is shown that it may be possible to obtain a simpler and approximate version of the conditional model from an unconditional model. Damage-causing potential of a ground motion also depends on its strong motion duration (SMD) and therefore a conditional scaling model is developed for SMD of the aftershock motion in several narrow frequency-bands. The model is developed for the larger-aftershock motions and it is shown that a reasonable replacement of such a model may be obtainable directly from an unconditional model. Finally, a simple weighted averaging scheme is proposed to obtain the composite SMD from the SMDs for different frequency bands by using the pseudo spectral acceleration spectrum of the motion.