Evaluation of shear wave velocity profile using SPT based uphole method

The uphole method is a field seismic test which uses receivers on the ground surface and an underground source. A modified form of the uphole method is introduced in order to obtain efficiently the shear wave velocity (VS) profile of a site. This method is called the standard penetration test (SPT)-uphole method because it uses the impact energy of the split spoon sampler in the SPT test as a source. Since the SPT-uphole method can be performed simultaneously with the SPT test it is economical and not labor intensive compared to the original uphole methods which use small explosives or a mechanical source. Field testing and interpretation procedures for the proposed method are described. To obtain reliable travel time information of the shear wave, the first peak point of the shear wave using two component geophones is recommended. Through a numerical study using the finite element method (FEM), the procedure of the proposed method was verified. Finally, the SPT-uphole method was performed at several sites, and the field applicability of the proposed method was verified by comparing the VS profiles determined by the SPT-uphole method with the profiles determined by the downhole, the spectral analysis of surfaces waves (SASW) method and from the SPT-N values.