Earthquake-induced displacements of gravity retaining walls and anchor-reinforced slopes

This paper examines in terms of seismic performance, the effectiveness of anchor reinforcement against gravity retaining walls used to stabilize a dry homogenous fill slope in earthquake-prone environment. Both analyzed stabilizing measures have the same design yield acceleration estimated from a limit equilibrium approach. The earthquake-induced displacements are calculated using a sliding block formulation of the equation of motion. Sliding failure along the base of the gravity retaining wall and rotational failure of the soil active wedge behind the wall, as well as rotational failure of the slide mass of the anchor-reinforced slope were considered in the present formulation. For the specific characteristics of the analyzed fill slope and input horizontal ground motion, the slope reinforced with anchors appears to experience vertical and horizontal seismic displacements at slope crest smaller by 12% and respectively, 32% than the vertical and horizontal earthquake-induced deformations estimated at the top of the active wedge behind the gravity retaining wall.