Close-range terrestrial digital photogrammetry and terrestrial laser scanning for discontinuity characterization on rock cuts

This paper reviews the application of close-range terrestrial digital photogrammetry and terrestrial laser scanning for discontinuity characterization on rock cuts. Terrestrial remote sensing techniques are being increasingly used as a complement to traditional scanline and window mapping methods. They provide more comprehensive information on rock cuts, allow surveying of inaccessible outcrops, and increase user safety. Selected case studies are used to estimate the accuracy of several 3D model registration approaches and the most time-, effort- and cost-effective methods are highlighted. It is shown that simple registration networks are able to provide adequate measurement of discontinuity orientation for engineering purposes. The case studies presented also illustrate the effects of sampling bias and limitations related to discontinuity characterization using remote sensing techniques. Vertical orientation bias and occlusion can be of particular concern when persistent discontinuities dip at the same angle as the camera/scanner line-of-sight. Major advantages of the techniques are presented illustrating how terrestrial remote sensing techniques provide rapid spatial measurements of discontinuity location, orientation and curvature and are well suited to the quantification of persistence magnitudes greater than 3 m.