کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
4927198 1431701 2017 16 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Energy-based evaluation of liquefaction potential under non-uniform cyclic loading
ترجمه فارسی عنوان
ارزیابی بر پایه انرژی بر پتانسیل مایع شدن در بارگذاری غیر سایکی غیر یکنواخت
کلمات کلیدی
پتانسیل روانابسیون، تست های سه بعدی سیکل ناپدید شده، بارگذاری چرخه غیر یکنواخت، وابستگی به استرس رویکرد مبتنی بر انرژی،
ترجمه چکیده
بارگذاری چرخه ای یکنواخت معمولا در تست های آزمایشگاهی برای ارزیابی مقاومت خاک به مایع سازی ناشی از زلزله مورد استفاده قرار می گیرد، حتی اگر تنش های سیکل ناشی از زمین لرزه ها در این زمینه بسیار نامنظم باشد. در این مقاله، استفاده از رویکردهای استرس و انرژی برای ارزیابی مقاومت خاکستر شن و ماسه در بارگذاری نامنظم مورد بحث قرار گرفته است. نتایج آزمایشات سه تایی سیکل ناپیوسته شامل یک سیکل بارگیری پیک مجزا با دامنه بزرگ ارائه شده و با آن ها مقایسه شده است با استفاده از بارگذاری یکنواخت. هرچند نمونه ها تحت بارگذاری الگوهای است که با روش های مبتنی بر استرس متعارف برابر می شوند، تعداد چرخه های مورد نیاز برای ایجاد مایع سازی به شدت به دامنه و محل پیک در تاریخ بارگیری وابسته است. در مقابل، یک رابطه منحصر به فرد بین انباشت انرژی تخریب شده در واحد حجم، با استفاده از اندازه گیری فشار و فشار و همچنین افزایش فشار آب باقیمانده مانده مشاهده شده برای تمام آزمونها، در طول کل برنامه بارگذاری چرخه ای، وجود دارد. این نشان می دهد که آزمایش های آزمایشگاهی معمولی با استفاده از شرایط بارگذاری یکنواخت می تواند برای تعیین مقاومت مایع در صورت تفسیر آنها بر اساس اصول انرژی استفاده شود.
موضوعات مرتبط
مهندسی و علوم پایه علوم زمین و سیارات مهندسی ژئوتکنیک و زمین شناسی مهندسی
چکیده انگلیسی
Uniform cyclic loading is commonly used in laboratory tests to evaluate soil resistance to earthquake-induced liquefaction, even if the cyclic stresses induced by earthquakes in the field are highly irregular. This paper discusses the use of stress and energy-based approaches to evaluate the liquefaction resistance of sand under irregular loading. Results of undrained cyclic triaxial tests including a large-amplitude singular peak loading cycle are presented and compared to those obtained using uniform loading. Although samples are subjected to loading patterns which would have been deemed equivalent by conventional stress-based methods, the number of cycles required to trigger liquefaction strongly depends on the amplitude and location of the peak within the loading history. Conversely, a unique relationship exists between the accumulation of dissipated energy per unit volume, computed using stress and strain measurements, and the observed residual pore water pressure build-up for all tests, throughout the entire cyclic loading application. This demonstrates that conventional laboratory tests using uniform loading conditions can be employed to determine liquefaction resistance if their interpretation is carried out based on energy principles.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Soil Dynamics and Earthquake Engineering - Volume 92, January 2017, Pages 650-665
نویسندگان
, , , ,