Light emission and atomic coordination structure of sol-gel derived erbium-doped SiO2-TiO2 thin films

- Er-doped SiO2-TiO2 films were prepared using a sol-gel technique.
- The Er dopants in SiO2-TiO2 films can prevent TiO2 precipitation from the matrix.
- More SiOTi bonds in SiO2-TiO2 thin films enhance a higher luminescence intensity.
- The 1.0% Er doped oxide film possesses the lowest oxygen coordination number.
- The 1.0% Er doped oxide film can account for the high luminescence intensity.

Erbium-doped SiO2-TiO2 thin films were prepared by the sol-gel method, using erbium nitrate pentahydrate powder, tetraethyl-orthosilicate (TEOS), and titanium tetraisopropoxide (TTIP) as precursors. The Si/Ti ratios in the SiO2-TiO2 films agree with the TEOS/TTIP molar ratio in the sol-gel precursor. Atomic coordination structure of erbium was defined by extended X-ray absorption fine structure spectrometry (EXAFS) and optical properties of the films were characterized by micro-photoluminescence (Micro-PL). The first-neighbor-shell coordination number of erbium in SiO2-TiO2 thin films would influence the optical properties. The 700 °C-annealed 80%SiO2-20%TiO2:Er1.0% (mol%) film with the lowest coordination number exhibits the highest photoluminescence intensity. Moreover, Fourier transform infrared spectroscopy (FTIR) analysis reveals that the main bonding structures of SiO2-TiO2 thin films are related to the erbium dopants. The modification of microstructure and chemical bonding configuration in the SiO2-TiO2 films by the Er-doping concentration and its influence on the optical properties are discussed.