کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5466535 | 1398905 | 2016 | 22 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Fabrication of Cu2ZnSnSe4 solar cells through multi-step selenization of layered metallic precursor film
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فناوری نانو (نانو تکنولوژی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
In this study, we proposed a 4-step selenization process for the RF-sputtered Cu-Zn/Sn metallic stack to prepare Cu2ZnSnSe4 (CZTSe) absorber. We applied a pre-heating treatment for the metal stack under vacuum prior to the selenization, which plays an important role to form a well inter mixed alloy with relatively smooth thin film morphology. The nucleation temperatures were controlled precisely from 150 °C to 500 °C during 4-step selenization to avoid the formation of secondary phases and to improve the crystal quality of CZTSe with a greater homogeneity in the composition. The formation of various phases during each step in 4-step selenization process were studied by X-ray Diffraction, Raman analysis and we proposed a possible reaction mechanism of the CZTSe formation with binary and ternary compounds as intermediates. We also performed optical analysis, including Uv-Visible absorption and low temperature photoluminescence, and scanning transmission electron microscope analysis for the CZTSe samples. Finally, an efficiency of 5.8% CZTSe solar cell is fabricated with an open circuit voltage of 370 mV, short circuit current of 31.99 mA/cm2, and a fill factor of 48.3%.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Thin Solid Films - Volume 618, Part A, 1 November 2016, Pages 42-49
Journal: Thin Solid Films - Volume 618, Part A, 1 November 2016, Pages 42-49
نویسندگان
Wei-Chao Chen, Venkatesh Tunuguntla, Hsien-Wen Li, Cheng-Ying Chen, Shao-Sian Li, Jih-Shang Hwang, Chin-Hao Lee, Li-Chyong Chen, Kuei-Hsien Chen,