کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
5787607 1641765 2017 8 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Rock-like brittle material fragmentation under coupled static stress and spherical charge explosion
ترجمه فارسی عنوان
تکه تکه شدن مواد شکننده سنگی تحت تنش استاتیک و انفجار شار کریستالی
کلمات کلیدی
مواد سنگی مانند، انفجار شار کشی، دهانه انفجار، استاتیک استرس
ترجمه چکیده
تجزیه و تحلیل تئوری و آزمایش های آزمایشگاهی برای بررسی قطعه سازی مواد سنگ مانند تحت تنش استاتیک و انفجار شار کوری انجام شد. تغییر شکل و حجم دهانه انفجار مورد مطالعه قرار گرفت. نتایج تجربی نشان می دهد که تنش استاتیک یک طرفه، شکل دهانه انفجار را در سطح آزاد از دایره به بیضی شکل تغییر می دهد و حجم دهانه انفجاری را افزایش می دهد. علاوه بر این، یک قدرت بالاتر مواد با یک حجم دهانه انفجار کوچکتر مطابقت دارد. تحت شرایط استرس برابر با دوگانه، ناحیه شکست در سطح آزاد همیشه دایره ای است و حجم دهانه انفجار کاهش می یابد و پس از آن افزایش می یابد. مکانیزم نفوذ استاتیک بر روی دهانه انفجار جزئیات مورد بحث قرار گرفته و پدیده های آزمایشی به خوبی توضیح داده شده است.
موضوعات مرتبط
مهندسی و علوم پایه علوم زمین و سیارات مهندسی ژئوتکنیک و زمین شناسی مهندسی
چکیده انگلیسی
Theoretical analysis and laboratory tests were performed to investigate the fragmentation of rock-like materials under coupled static stress and spherical charge explosion. The variations of the explosion crater shape and volume were studied. The experimental results indicate that uniaxial static stress changes the shape of the explosion crater at the free surface from circular to elliptical and increases the volume of the explosion crater. In addition, a higher material strength corresponds to a smaller explosion crater volume. Under biaxial equal stress condition, the failure zone on the free surface is always circular and the volume of the explosion crater decreases and subsequently increases. The influence mechanisms of static stress on the explosion crater are discussed in detail, and the experimental phenomena are well explained.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Engineering Geology - Volume 220, 30 March 2017, Pages 266-273
نویسندگان
, , , , , ,