Vitroceramic interface deposited on titanium substrate by pulsed laser deposition method

Pulsed laser deposition (PLD) method was used to obtain biovitroceramic thin film coatings on titanium substrates. The composition of the targets was selected from SiO2-CaO-P2O5-(CaF2) systems and the corresponding masses were prepared using the sol-gel method. The depositions were performed in oxygen atmosphere (100 mTorr), while the substrates were heated at 400 °C. The PLD deposited films were analysed through different experimental techniques: X-ray diffraction, scanning (SEM, EDX) and transmission (HRTEM, SAED) electron microscopy and infra-red spectroscopy coupled with optical microscopy. They were also biologically tested by in vitro cell culture and the contact angle was determined. The bioevaluation results indicate a high biocompatibilty of the obtained materials, demonstrating their potential use for biomedical applications.

178