Sorption of the cyanobacterial toxins cylindrospermopsin and anatoxin-a to sediments

The occurrence of the cyanobacterial toxins anatoxin-a (ATX) and cylindrospermopsin (CYN) in surface waters has been reported throughout the world. Beside degradation, sorption is an important pathway for toxin elimination if these resources are used for drinking water production via sediment passage. However, to date studies that systematically investigated sorption of these toxins onto sediments are lacking. Therefore, the aim of our work was (i) to determine the adsorption coefficients of ATX and CYN according to the Freundlich and Langmuir model for sediments of various textures and (ii) to derive sorption-relevant sediment characteristics. We determined sorption parameters in air-dried samples of eight differently textured sediments using batch experiments. Results for both toxins showed best fits with the Langmuir model. Organic C proved to be the main sediment parameter determining CYN sorption. There was no or little CYN sorption on sandy and silty sediments (0-39 μg kg−1), respectively, presumably due to charge repulsion from the negatively charged surfaces. Sorption of ATX (max. sorbent loading ranging from 47 to 656 μg kg−1) was much stronger than that of CYN (max. sorbent loading ranging from 0 to 361 μg kg−1) and predominantly controlled by clay and to a minor degree also by organic C and silt. While ATX sorption to most sediments occurred mainly through cation exchange this mechanism played only a minor role in CYN sorption to organic C. Hence, high mobility for CYN and moderate mobility for ATX during sediment passage has to be expected.