Potentiality of rainwater harvesting for an urban community in Bangladesh

- Analytic Hierarchy Process (AHP) used for identifying potential rainwater harvesting zones.
- HEC-HMS reasonably calculate the required rain induced runoff.
- Geographic Information System (GIS) featured potential zones both with and without roof area.

SummaryDue to cost effectiveness, rainwater harvesting (RWH) systems are practicing already in some rural parts of Bangladesh but very few in urban areas. This paper aimed to evaluate the potentiality of RWH systems in the South Agrabad in Chittagong city with an average annual precipitation of 3000 mm, experiencing both water scarcity and urban flooding in the same year. The adopted approach was Analytic Hierarchy Process (AHP) based multicriteria decision analysis technique, and the evaluation criteria were roof area, slope, drainage density and runoff coefficient. Geospatial Hydrologic Modeling Extension supported hydrologic model viz. HEC-HMS used to simulate the precipitation-runoff process, the model outcomes showed RWH potentiality which could minimize stagnant storm water up to 26% through supplementing city water supply annually up to 20 liter/person/day. Then, assigning suitable weightage to the evaluation criteria with their associated features in ArcGIS 9.3, the study area was reasonably divided into three potential zones i.e. good, moderate and poor covering 19%, 64% and 17% of the total area respectively. Thus, this is envisaged AHP using HEC-HMS could provide important guidance to the decision supporting system not only for urban areas but also for the wide sub-basin/basin context.