Microseismic monitoring and analysis of induced seismicity source mechanisms in a retreating room and pillar coal mine in the Eastern United States

A microseismic monitoring system was installed in an underground room and pillar coal mine in the Eastern United States to analyze the occurrence and characteristics of induced seismicity during the retreat of two panels in the mine. This study is the first microseismic monitoring effort at an underground coal mine in nearly 30 years. During the retreat of the first panel, an array of eight uniaxial geophones, installed 10 ft. into the roof, recorded events and their magnitudes. The second panel was monitored using an array of twelve uniaxial geophones and two triaxial geophones, also installed 10 ft. into the roof. Comparing the results of these studies, it has been found that the magnitude of seismic events is minimally affected by immediate roof geology or depth of cover. However, it was observed in both studies that the rate at which seismic events occurred did vary with changing roof geology and depth of cover. Using the seismic data from the second panel retreat, focal mechanism solutions were generated for 50 hand-picked events in order to determine if the failure was in compression, tension, or shear. Results of the focal mechanism solutions show that stress relief resulting in dilational events occurs at significant depths, 150-200 m in this case, beneath the active mining face.