کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7933951 1512864 2017 8 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Self-assembly by multi-drop evaporation of carbon-nanotube droplets on a polycarbonate substrate
ترجمه فارسی عنوان
خودآموزی با چند قطره تبخیر از قطرات کربن نانولوله در بستر پلی کربنات
کلمات کلیدی
تبخیر چند قطره، قطرات نانولوله کربن، نانوساختار خودمختار، مقاومت الکتریکی، زاویه تماس، رطوبت تماس زاویه هیسترزیس،
ترجمه چکیده
نانولوله های کربنی با قرار دادن یک قطره از پراکندگی آب و اجازه دادن به آن در یک سوبستر پلی کربنات، به خود جذب می شوند. اثر تعداد قطره ها، که در نقطه ی مشابه رسوب قرار می گیرند، بر تراکم خودمونتاژ، برای پنج مرحله اول، نسبتا متناسب است. نانوساختارهای نانوذرات به دست آمده برای مقاومت الکتریکی و قابلیت رطوبت آنها تست شده است. دو غلظت استفاده می شود. یافته شده است که یک غلظت بالاتر و مهمتر از آن، تعداد بیشتری از رسوبات قطره باعث می شود که مقاومت الکتریکی تا چهار مرتبه کاهش یابد و زاویه تماس استاتیک به میزان بیش از سه برابر کاهش یابد. زاویه تماس زاویه تماس نیز افزایش می یابد زیرا زاویه تماس پیشرفته افزایش یافته و یک زاویه کاهش می یابد. این مسئله با درجه پوشش پوشش توسط نانولوله های کربنی مطرح شده است و همچنین با استفاده از تصاویر میکروسکوپ الکترونی اسکن شده است. یک پوشش بهتر پیشنهاد شده است که باعث می شود تا یک قطره پیشرفته و یک نیروی مویرگی بالاتر برای یک قطره به عقب برسد.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی مواد مواد الکترونیکی، نوری و مغناطیسی
چکیده انگلیسی
Carbon nanotubes are allowed to self-assemble by depositing a droplet of a water dispersion thereof and letting it evaporate on a polycarbonate substrate. The effect of the number of droplets, evaporated on the same deposition spot, on the self-assembly density is assessed to be more than proportional for the first five depositions. The obtained nanoporous nanostructures are further tested for their electrical resistance and wettability. Two concentrations are used. It is found that a higher concentration and more importantly a higher number of droplet depositions causes the electrical resistance to decrease up to four orders of magnitude and the static contact angle to decrease more than three times. The contact angle hysteresis also increases due to an increasing advancing contact angle and a decreasing receding one. This is explained by the degree of coverage of the substrate by the carbon nanotubes as is also shown by scanning electron microscope images. A better coverage is suggested to cause more pinning for an advancing droplet and a higher capillary force for a receding droplet.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Physica E: Low-dimensional Systems and Nanostructures - Volume 85, January 2017, Pages 206-213
نویسندگان
, , , ,