کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
8033385 | 1517971 | 2017 | 27 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Effects of temperature and pressure on sulfurization of molybdenum nano-sheets for MoS2 synthesis
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فناوری نانو (نانو تکنولوژی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
The synthesis of high-quality, thickness-controlled molybdenum disulfide (MoS2) films via vapor-phase growth remains a challenging process. In this work, the synthesis of two-dimensional (2D) MoS2 films via sputtering and sulfurization in a quartz tube furnace was investigated. Thicknesses of MoS2 films were dependent on the thickness of Mo films grown using sputtering. The Raman spectra of the MoS2 films exhibited a 19.12 cmâ 1 difference between two peaks, including in-plane vibration (E12g) and out-of-plane vibration (A1g), indicating a monolayer. Room temperature photoluminescence measurements indicate a peak spectral emission at 1.89 eV. Surface morphology of multilayer MoS2 films and their crystallization processes were observed using atomic force microscopy and scanning electron microscopy. Low temperature (450 °C) synthesis revealed a wide full width at half maximum (FWHM) of both modes, E12g and A1g, which indicates poor crystallinity. In contrast, using a high sulfurization temperature (750 °C) results in a higher crystallinity or narrow FWHM. Film synthesis at the optimized process conditions (750 °C and a pressure of 1 KPa) produced continuous, uniform, and full-coverage films.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Thin Solid Films - Volume 641, 1 November 2017, Pages 79-86
Journal: Thin Solid Films - Volume 641, 1 November 2017, Pages 79-86
نویسندگان
Rauf Shahzad, TaeWan Kim, Sang-Woo Kang,