کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
8035829 1518059 2013 8 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Indium tin oxide thin films elaborated by sol-gel routes: The effect of oxalic acid addition on optoelectronic properties
ترجمه فارسی عنوان
فیلم های نازک اکسید قلع اتیل ساخته شده با روش های سل-ژل: اثر افزودن اگزالیک اسید بر خواص اپتوالکترونیک
موضوعات مرتبط
مهندسی و علوم پایه مهندسی مواد فناوری نانو (نانو تکنولوژی)
چکیده انگلیسی
Single layer indium tin oxide (ITO) thin films were deposited on glass using modified sol-gel formulations. The coating sols were prepared using indium (InCl3∙ 4H2O) and tin salts (SnCl4∙ 5H2O). The stable sols were obtained using ethanol (C2H5OH) and acetylacetone (C5H8O2) as solvents and by the addition of oxalic acid dihydrate (C2H2O4∙ 2H2O) in different amounts. The effect of oxalic acid content in the sol formulation and post-coating calcination treatment (in air at 300-600 °C) on electrical/optical properties of ITO films have been reported. It was shown that film formation efficiency, surface coverage and homogeneity were all enhanced with oxalic acid addition. Oxalic acid modification also leads to a significant improvement in electrical conductivity without affecting the film thickness (45 ± 3 nm). ITO films exhibiting high transparency (≈ 93%, visible region) with a sheet resistance as low as 3.8 ± 0.4 kΩ/sqr have been formed by employing coating sols with optimized oxalic acid amount. The mechanisms and factors affecting the functional performance of oxalic acid-modified films have been thoroughly discussed and related to the microstructural and chemical characteristic of the films achieved by oxalic acid addition.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Thin Solid Films - Volume 545, 31 October 2013, Pages 56-63
نویسندگان
, ,