Interaction of shotcrete with rock and rock bolts—A numerical study

The shotcrete–rock interaction is very complex and is influenced by a number of factors. The influence of the following factors was investigated by a series of numerical analyses: the surface roughness of the opening, the rock strength and Young's modulus, the discontinuities, the extent and properties of the excavated disturbed zone, the mechanical properties of the interface between shotcrete and rock, and the thickness of the shotcrete lining and the rock bolts. The study was carried out as a sensitivity analysis. The results showed that the rock strength and the surface roughness had significant impact on the number of failures at the rock–shotcrete interface and in the shotcrete lining. Furthermore, the behaviour of the lining is sensitive to small amplitudes of the surface roughness. In all the cases investigated, a high interface strength was favourable. The results indicate that if a thick shotcrete lining is dependent on the bond strength. The benefit of using a thicker lining can be doubtful. The analyses showed that for an uneven surface the extent of the EDZ had a minor effect on the behaviour of the shotcrete lining. Furthermore, if rock bolts were installed at the apex of the protrusion instead of at the depression, the number of failures decreased both at the interface and in the lining.