کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
82376 158393 2011 11 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Field characterization of olive (Olea europaea L.) tree crown architecture using terrestrial laser scanning data
موضوعات مرتبط
مهندسی و علوم پایه علوم زمین و سیارات علم هواشناسی
پیش نمایش صفحه اول مقاله
Field characterization of olive (Olea europaea L.) tree crown architecture using terrestrial laser scanning data
چکیده انگلیسی

Since the introduction of Terrestrial Laser Scanning (TLS) instruments, there now exists a means of rapidly digitizing intricate structural details of vegetation canopies using Light Detection and Ranging (LiDAR) technology. In this investigation, Intelligent Laser Ranging and Imaging System (ILRIS-3D) data was acquired of individual tree crowns at olive (Olea europaea L.) plantations in Córdoba, Spain. In addition to conventional tripod-mounted ILRIS-3D scans, the unit was mounted on a platform (12 m above ground) to provide nadir (top–down) observations of the olive crowns. 24 structurally variable olive trees were selected for in-depth analysis. From the observed 3D laser pulse returns, quantitative retrievals of tree crown structure and foliage assemblage were obtained. Robust methodologies were developed to characterize diagnostic architectural parameters, such as tree height (r2 = 0.97, rmse = 0.21 m), crown width (r2 = 0.97, rmse = 0.13 m), crown height (r2 = 0.86, rmse = 0.14 m), crown volume (r2 = 0.99, rmse = 2.6 m3), and Plant Area Index (PAI) (r2 = 0.76, rmse = 0.26 m2/m2). With the development of such LiDAR-based methodologies to describe vegetation architecture, the forestry, agriculture, and remote sensing communities are now faced with the possibility of replacing current labour-intensive inventory practices with, modern TLS systems. This research demonstrates that TLS systems can potentially be the new observational tool and benchmark for precise characterization of vegetation architecture for improved agricultural monitoring and management.

Research highlights▶ ILRIS-3D data was used to characterize individual tree crown structural parameters. ▶ Crown width, crown height, crown volume, and plant area index were retrieved. ▶ Novel method to characterized crown-level clumping is described.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Agricultural and Forest Meteorology - Volume 151, Issue 2, 15 February 2011, Pages 204–214
نویسندگان
, , , , , ,