Microstructural characterization of warm rolled Cr-containing low carbon steel Fulltext Access 4 Pages 2007
Direct observation of potential barrier behavior in yttrium–barium titanate observed by electrostactic force microscopy Fulltext Access 4 Pages 2007
Effect of dendrite arm spacing on castability of a directionally solidified nickel alloy Fulltext Access 4 Pages 2007
Analysis of interfacial behavior in titanium matrix composites by using the finite element method (SCS-6/Ti55) Fulltext Access 4 Pages 2007
Microstructural evolution in a fine-grained Al–0.3 wt.% Sc alloy produced by severe plastic deformation Fulltext Access 4 Pages 2007
Relationship between formability and microstructure of Al alloy sheet locally modified by friction stir processing Fulltext Access 4 Pages 2007
On dipping of γ-TiAl in low-concentration phosphoric acid solution and consecutive oxidation resistance at 800 °C Fulltext Access 4 Pages 2007
Study of microstructural evolution in friction-stir welded thin-sheet Al–Cu–Li alloy using transmission-electron microscopy Fulltext Access 4 Pages 2007
Size effect of Al particles on the structure and oxidation of Ni/Ni3Al composites transformed from electrodeposited Ni–Al films Fulltext Access 4 Pages 2007
The spiral growth of lamellar eutectics in a high magnetic field during the directional solidification process Fulltext Access 4 Pages 2007
Visualization of three-dimensional pore morphologies in a high-pressure die-cast Mg–Al–RE alloy Fulltext Access 4 Pages 2007
Physical and magnetic characterization of co-precipitated nanosize Co–Ni ferrites Fulltext Access 4 Pages 2007
Toughness and adhesion of atomic layer deposited alumina films on polycarbonate substrates Fulltext Access 4 Pages 2007
Effects of high uniform magnetic fields on diffusion behavior at the Cu/Al solid/liquid interface Fulltext Access 4 Pages 2007
On the dendritic tip stability parameter for aluminium alloy solidification Fulltext Access 4 Pages 2007
Relationship between deformation behavior and microstructural evolution of friction stir processed Zn–22 wt.% Al alloy Fulltext Access 4 Pages 2007
Comments on “The fatigue-endurance limit of a Zr-based bulk metallic glass” Fulltext Access 4 Pages 2007
Effect of sintering temperature on a single-wall carbon nanotube-toughened alumina-based nanocomposite Fulltext Access 4 Pages 2007
Weld metal microstructural characteristics in pulsed Nd: YAG laser welding Fulltext Access 4 Pages 2007
DSC analysis of liquid volume fraction and compressive behavior of the semi-solid Si3N4w/Al–Si composite Fulltext Access 4 Pages 2007
Microstructural characteristics of pure gold processed by equal-channel angular pressing Fulltext Access 4 Pages 2007
Compressive strength and yield asymmetry in extruded Mg–Zn–Ho alloys containing quasicrystal phase Fulltext Access 4 Pages 2007
Dependence of deformation twinning on grain orientation in compressed high manganese steels Fulltext Access 4 Pages 2007
Characterization of Mg,Al-hydrotalcite conversion film on Mg alloy and Cl− and CO32- anion-exchangeability of the film in a corrosive environment Fulltext Access 4 Pages 2007
Geometric relaxation of nanoporous metals: The role of surface relaxation Fulltext Access 4 Pages 2007
Characterization of Cr–Ni multilayers electroplated from a chromium(III)–nickel(II) bath using pulse current Fulltext Access 4 Pages 2007
Dependence of the representative strain on the hardening functions of metallic materials in indentation Fulltext Access 4 Pages 2007
Phase separation and improved plasticity by modulated heterogeneity in Cu–(Zr, Hf)–(Gd, Y)–Al metallic glasses Fulltext Access 4 Pages 2007
Microstructure and precipitates in as-cast Co38Ni33Al29 shape memory alloy Fulltext Access 4 Pages 2007
Correlation of chemistry, microstructure and ductile fracture behaviours of niobium-stabilized austenitic stainless steel at elevated temperature Fulltext Access 4 Pages 2007
Dissolved oxygen and the partial thermodynamic properties of γ′-Ni3Al + β-NiAl alloys Fulltext Access 4 Pages 2007
Rapid and mass growth of stress-induced nanowhiskers on the surfaces of evaporated polycrystalline Cu films Fulltext Access 4 Pages 2007
Low-temperature sintering of high-density aluminium nitride ceramics without additives at high pressure Fulltext Access 4 Pages 2007
X-ray absorption spectroscopy study at the Si K-edge of tungsten carbide–silicon carbide thin films Fulltext Access 4 Pages 2007
The electronic structure and hydrogen gas-induced environmental embrittlement in Ni4Mo alloy Fulltext Access 4 Pages 2007
Adhesion-energy measurements by means of white-light interferometry and controlled-buckling technique Fulltext Access 4 Pages 2007
Evaluation of hardness of the interfacial reaction products at the alumina–stainless steel brazed interface by modeling of nanoindentation results Fulltext Access 4 Pages 2007
Enhanced glass-forming ability of Fe-based bulk metallic glasses prepared using hot metal and commercial raw materials through the optimization of Mo content Fulltext Access 4 Pages 2007
Coupling effect of multiple precipitates on the ductile fracture of aged Al–Mg–Si alloys Fulltext Access 4 Pages 2007
Compositionally graded yttria-stabilized zirconia coating on stainless steel using laser engineered net shaping (LENS™) Fulltext Access 4 Pages 2007
Relationship between yield strength and grain size for a bimodal structural ultrafine-grained ferrite/cementite steel Fulltext Access 4 Pages 2007
Grain boundary doping of Cu thin films with Bi: A route to create smooth and stable nanocrystalline surfaces Fulltext Access 4 Pages 2007
Numerical study on microcompression tests of anisotropic single crystals Fulltext Access 4 Pages 2007
Enhanced internal oxidation as trigger for breakaway oxidation of Fe–Cr alloys in gases containing water vapor Fulltext Access 4 Pages 2007
Microstructural and textural changes in a severely cold rolled boron-added interstitial-free steel Fulltext Access 4 Pages 2007
High fracture toughness of extruded Mg–Zn–Y alloy by the synergistic effect of grain refinement and dispersion of quasicrystalline phase Fulltext Access 4 Pages 2007
Effect of heating mode on the densification and microstructural homogenization response of premixed bronze Fulltext Access 4 Pages 2007
Synthesis of lead zirconate titanate–cobalt ferrite magnetoelectric particulate composites via an ethylenediaminetetraacetic acid–citrate gel process Fulltext Access 4 Pages 2007
Effect of strain path change on the plastic responses during uniaxial loading of materials pre-deformed by equal channel angular extrusion Fulltext Access 4 Pages 2007
Experimental determination of phase equilibria in the silver–copper oxide system at high temperature Fulltext Access 4 Pages 2007
Role of crystallized phases in sheet resistance of amorphous AgInSbTe chalcogenide film Fulltext Access 4 Pages 2007
A low-temperature high-strain-rate formable nanocrystalline superplastic ceramic Fulltext Access 4 Pages 2007
Comparison on the magnetic properties and phase evolution of melt-spun SmCo7 ribbons with Zr and Hf substitution Fulltext Access 4 Pages 2007
Grain size and grain boundary effects on the mechanical behavior of fully stabilized zirconia investigated by nanoindentation Fulltext Access 4 Pages 2007
Wear detection of candidate MEMS/NEMS lubricant films using atomic force microscopy-based surface potential measurements Fulltext Access 4 Pages 2007
A novel method for in situ formation of bulk layered composites with compositional gradients by magnetic field gradient Fulltext Access 4 Pages 2007
Limiting austenite grain size of TiN-containing steel considering the critical particle size Fulltext Access 4 Pages 2007
Interstitial defects in 316L austenitic stainless steel containing “colossal” carbon concentrations: An internal friction study Fulltext Access 4 Pages 2007
Effect of sintering temperature on the electrochemical, hardness and tribological properties of aluminide-reinforced austenitic stainless steel Fulltext Access 4 Pages 2007
Experimental evidence of two-stage formation of Al3Ni in reactive Ni/Al multilayer foils Fulltext Access 4 Pages 2007
An electron backscatter diffraction analysis of misorientation distributions in titanium alloys Fulltext Access 4 Pages 2007
Severe plastic deformation of copper by machining: Microstructure refinement and nanostructure evolution with strain Fulltext Access 4 Pages 2007
The effect of grain boundary sliding on curvature-driven boundary migration in Zn bicrystals Fulltext Access 4 Pages 2007
Solidification and remelting of aluminum though alumina preform under a centrifugal force field Fulltext Access 4 Pages 2007