Graphene-loaded nanofiber-modified electrodes for the ultrasensitive determination of dopamine

• A novel electrode based on electrospun graphene/polyaniline/polystyrene nanofibers has been developed.
• The proposed system provides ultrahigh sensitivity, good selectivity and wide linearity for the determination of dopamine.
• This system was successfully applied to determine dopamine in complex biological environment with excellent reproducibility.

A novel and highly sensitive electrochemical system based on electrospun graphene/polyaniline/polystyrene (G/PANI/PS) nanofiber-modified screen-printed carbon electrodes has been developed for dopamine (DA) determination. A dramatic increase (9 times) in the current signal for the redox reaction of a standard, ferri/ferrocyanide [Fe(CN)6]3−/4− couple was found when compared to an unmodified electrode. This modified electrode also exhibited favorable electron transfer kinetics and excellent electrocatalytic activity toward the oxidation of DA. When used together with square wave voltammetry (SWV), DA can be selectively determined in the presence of the common interferents (i.e. ascorbic acid and uric acid). Under optimal conditions, a very low limit of detection (0.05 nM) and limit of quantification (0.30 nM) were achieved for DA. In addition, a wide dynamic range of 0.1 nM to 100 μM was found for this electrode system. Finally, the system can be successfully applied to determine DA in complex biological environment (e.g. human serum, urine) with excellent reproducibility.

Figure optionsDownload as PowerPoint slide