کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1668883 | 1008876 | 2011 | 7 صفحه PDF | دانلود رایگان |

Micro-sized ZnO rods on a SnO2 coated glass substrate were obtained by the spray pyrolysis method. Then a p-type CuSCN layer was deposited on this micro-sized n-ZnO to produce a p–n heterojunction. Temperature dependent current–voltage characteristics were measured in the temperature range 150–300 K with a step of 25 K. The current–voltage characteristics exhibit electrical rectification behavior. The zero bias barrier height Φb0 increases and the ideality factor n decreases with an increase in temperature. The apparent Richardson constant and mean barrier height were found to be 0.0028 A cm− 2 K− 2 and 0.228 eV respectively in the range 150–300 K. After a barrier height inhomogeneity correction, the Richardson constant and the mean barrier height were obtained as 65.20 A cm− 2 K− 2 and 0.840 eV, respectively.
Journal: Thin Solid Films - Volume 519, Issue 11, 31 March 2011, Pages 3679–3685