Influence of shear on the production of extracellular polymeric substances in membrane bioreactors

Shear is used to control fouling in membrane bioreactor (MBR) systems. However, shear also influences the physicochemical and biological properties of MBR biomass. The current study examines the relationship between the level of shear and extracellular polymeric substance (EPS) production in MBRs. Two identical MBRs were operated in parallel where the biomass in one reactor was exposed to seven times greater shear forces. The concentrations of floc-associated and soluble EPS were monitored for the duration of the experiment. The stickiness of extracted floc-associated EPS from each reactor was also characterized using atomic force microscopy. A mathematical model of floc-associated and soluble EPS production was applied to quantitatively describe changes in EPS production with shear. Biomass grown in a high shear environment has lower floc-associated EPS production compared to biomass grown in a lower shear environment. This decrease in floc-associated EPS production also corresponds to a decrease in soluble EPS production, which can be explained by both the lower concentration of floc-associated EPS and the production of stickier floc-associated EPS that is more erosion resistant in the high shear reactor. This research suggests that mechanical stresses can have a significant impact on the production rates of floc-associated and soluble EPS—key parameters governing membrane fouling in MBRs.