The role of pre-existing tectonic structures and magma chamber shape on the geometry of resurgent blocks: Analogue models

• The influence of magma chamber geometry on resurgence has been tested.
• The most uplifted sector is always in correspondence of the thickest overburden.
• The stress field induced by resurgence is dictated by the geometry of the magma body.
• The related deformational features are in part controlled by pre-existing structures.

A set of analogue models has been carried out to understand the role of an asymmetric magma chamber on the resurgence-related deformation of a previously deformed crustal sector. The results are then compared with those of similar experiments, previously performed using a symmetric magma chamber. Two lines of experiments were performed to simulate resurgence in an area with a simple graben-like structure and resurgence in a caldera that collapsed within the previously generated graben-like structure. On the basis of commonly accepted scaling laws, we used dry-quartz sand to simulate the brittle behaviour of the crust and Newtonian silicone to simulate the ductile behaviour of the intruding magma. An asymmetric shape of the magma chamber was simulated by moulding the upper surface of the silicone. The resulting empty space was then filled with sand. The results of the asymmetric-resurgence experiments are similar to those obtained with symmetrically shaped silicone. In the sample with a simple graben-like structure, resurgence occurs through the formation of a discrete number of differentially displaced blocks. The most uplifted portion of the deformed depression floor is affected by newly formed, high-angle, inward-dipping reverse ring-faults. The least uplifted portion of the caldera is affected by normal faults with similar orientation, either newly formed or resulting from reactivation of the pre-existing graben faults. This asymmetric block resurgence is also observed in experiments performed with a previous caldera collapse. In this case, the caldera-collapse-related reverse ring-fault is completely erased along the shortened side, and enhances the effect of the extensional faults on the opposite side, so facilitating the intrusion of the silicone. The most uplifted sector, due to an asymmetrically shaped intrusion, is always in correspondence of the thickest overburden. These results suggest that the stress field induced by resurgence is likely dictated by the geometry of the intruding magma body, and the related deformation is partially controlled by pre-existing tectonic and/or volcano-tectonic structures.