کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
4927692 1363220 2017 13 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Effects of cyclic vertical loading on bearing and pullout capacities of piles with continuous helix wing
ترجمه فارسی عنوان
اثر بارگذاری عمودی چرخه بر روی ظرفیت تحمل و خروجی شمع با بال اسپلیکس مداوم
ترجمه چکیده
آزمایشات آزمایشگاهی و آزمایشگاهی برای بررسی ظرفیت تحمل و خروج شمع فولاد با جبهه اسپری پیوسته در طول بارگذاری سیکل انجام شد. هر دو شمع مستطیلی و مستطیلی به طور انحصاری فشرده سازی، کشش تک تک و بارگیری مجدد چرخشی در آزمایشگاه مورد آزمایش قرار گرفت، در حالی که تنها شمع مستطیلی اسپیلکس در این زمینه مورد آزمایش قرار گرفت. هر دو آزمایشگاه و آزمایشات میدانی نشان داد که ظرفیت باربری و خروجی شمع پیوسته پیوسته تحت بارگذاری چرخشی سیکل به حدود 60 تا 80 درصد از بارگیری ها در محدوده بارگیری مونوتنیک کاهش یافته و کاهش بیشتری در آزمایش های آزمایشگاهی دیده می شود. کاهش مقاومت به طور عمده به علت کاهش اصطکاک شفت بود که احتمالا منجر به اختلال در خاک و سست شدن گرد و غبار گردید. آزمایشات آزمایشگاهی همچنین نشان داد که مقاومت به نوک شمع مستطیلی تحت بارگیری چرخشی سیکل کاهش می یابد، به همین علت به دلیل خستگی خاک، به ویژه زیر نوک شمع، کاهش می یابد. در مقابل مقاومت نوک شمع مستطیلی مداوم با بارگذاری چرخه ای با توجه به حضور بال در بالای نوک شمع که باعث تخریب خاک می شود، کاهش نمی یابد. این یافته ها با مشاهدات آزمون های مشابه مشابه پشتیبانی می شود.
موضوعات مرتبط
مهندسی و علوم پایه علوم زمین و سیارات مهندسی ژئوتکنیک و زمین شناسی مهندسی
چکیده انگلیسی
Laboratory and field tests were conducted to investigate the bearing and pullout capacities of steel piles with a continuous helix wing during cyclic loading. Both continuous helix and straight-sided piles were subjected to monotonic compressive, monotonic tensile, and cyclic reversal loading in the laboratory, while only the continuous helix pile was tested in the field. Both the laboratory and the field tests showed that the bearing and pullout capacities of the continuous helix pile under cyclic reversal loading decreased to approximately 60-80% of those of the pile under monotonic loading, with a larger reduction seen in the laboratory tests. The decrease in resistance was mainly due to the reduction in shaft friction, which was likely to be the result of soil disturbance and loosening around the pile with cyclic loading. The laboratory tests also showed that the tip resistance of the straight-sided pile under cyclic reversal loading was reduced, similarly due to the loosening of the soil, particularly underneath the pile tip. The tip resistance of the continuous helix pile, in contrast, did not degrade with cyclic loading, owing to the presence of the wing immediately above the pile tip that inhibited the loosening of the soil. These findings were supported by similar field test observations.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Soils and Foundations - Volume 57, Issue 1, February 2017, Pages 141-153
نویسندگان
, , , ,