کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
9812793 1518120 2005 6 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Optical characterization of MoO3 thin films produced by continuous wave CO2 laser-assisted evaporation
موضوعات مرتبط
مهندسی و علوم پایه مهندسی مواد فناوری نانو (نانو تکنولوژی)
پیش نمایش صفحه اول مقاله
Optical characterization of MoO3 thin films produced by continuous wave CO2 laser-assisted evaporation
چکیده انگلیسی
MoO3 thin films were prepared, in this work, evaporating the material with a CO2 laser set up in continuous wave mode. The films were deposited on glass substrates at different substrate temperatures and high vacuum. Additionally, other samples were prepared at different oxygen pressures in the chamber. The samples were characterized by X-ray photoelectron spectroscopy (XPS) and optical transmittance measurements in the visible range. The XPS analyses showed evidence of thin film formation with two composition mix: MoO3 and MoO2; this result appeared in all fabricated samples. The transmittance spectra were reproduced theoretically and from the simulation were calculated the index of refraction, the absorption coefficient of the material, the forbidden energy gap and sample thickness. Samples prepared at high substrate temperature presented, in the red region, an absorption band of about 2.5×104 cm−1. This band kept its wavelength position when oxygen was injected in the chamber but its height decreased by one order of magnitude, indicating it is associated to oxygen vacancies in the sample.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Thin Solid Films - Volume 478, Issues 1–2, 1 May 2005, Pages 146-151
نویسندگان
, , ,