Analysis of dichroic dye-doped polymer-dispersed liquid crystal materials for display devices

Dichroic polymer-dispersed liquid crystals (DPDLCs) based on nematic liquid crystal materials with azo dye were investigated in detail for the application of display devices. Polarizing optical microscopy, differential scanning calorimeter and electro-optic experiments all have shown that the DPDLC containing low concentration of dyes modifies the basic properties of these materials like optical transmission, threshold voltage, contrast ratio and absorbance factor. A minimum amount of dye needs to be added to the liquid crystal with the polymer matrix for its effective phase separation and to minimize the transmittance in the OFF state and therefore gives rise to an overall improvement in contrast ratio of the devices. Molecular orientation and dynamics in droplet sizes are readily controlled in these DPDLC materials. These findings imply that the value of the threshold electric field Eth is approximately 8 V/μm for pure polymer-dispersed liquid crystal (without dye) where the threshold electric field Eth values are approximately 4.0 V/μm, 2.0 V/μm, 1.7 V/μm 1.0 V/μm, for 0.0625%, 0.125%, 0.25% and 0.5% with azo dye in DPDLCs, respectively. From the results we can also infer that the maximum contrast is approximately 2.55 times the minimum contrast observed in the experiment for DPDLCs. The results show that the DPDLC with proscribed dye concentration will be possibly suitable and promising functional electronic materials for green technology flexible liquid crystal display.