Debris flow evolution and the activation of an explosive hydrothermal system; Te Maari, Tongariro, New Zealand

Analysis of the pre- and post-eruption topography, together with observations of the avalanche deposition sequence, yields a triggering mechanism for the 6 August 2012 eruption of Upper Te Maari. The avalanche was composed of a wedge of c. 683 000-774 000 m3 of coarse breccia, spatter and clay-rich tuffs and diamictons which slid from the western flanks of the Upper Te Maari Crater, the failure plane is considered to be a hydrothermally altered clay layer. This landslide led to a pressure drop of up to 0.5 MPa, enough to generate an explosive eruption from the hydrothermal system below, which had been activated over the months earlier by additional heat and gas from a shallow intrusion. The landslide transformed after c. 700 m into a clay-rich cohesive debris flow, eroding soils from steep, narrow stretches of channel, before depositing on intermediate broad flatter reaches. After each erosive reach, the debris flow contained greater clay and mud contents and became more mobile. At c. 2 km flow distance, however, the unsaturated flow stopped, due to a lack of excess pore pressure. This volume controlled flow deposited thick, steep sided lobes behind an outer levee, accreting inward and upward to form a series of curved surface ridges.