Seconds after impact: Insights into the thermal history of impact ejecta from diffusion between lechatelierite and host glass in tektites and experiments

The quantitative characterization of diffusion in boundary layers based on our experiments allow us to set limits on the thermal history of the natural tektite in which the boundary layers were discovered. If the interdiffusion between the silica and felsic melts occurred at constant temperature, the duration of heating experienced by the natural tektite we studied depends on temperature; possible solutions include heating at ∼2000 °C for ∼70 s, −2400 °C for ∼3 s. We also explored non-isothermal, asymptotic cooling histories; for a maximum temperature of 2400 °C, a characteristic cooling time scale of ∼50 s is implied, whereas, for 2000 °C, the time scale is ∼1400 s. Further, a maximum temperature of ∼2360 °C yields an effective diffusive time scale of ∼5 s, a cooling time scale of ∼90 s, and a cooling rate at the glass transition temperature of ∼5 °C/s; results that are consistent with independent estimates of cooling time scales for ∼1 cm clasts (Xu and Zhang, 2002), as well as cooling rates at the glass transition temperature (Wilding et al., 1996) - thus satisfying all currently available relevant data. More complex T-t paths are possible and can also be modeled using our experimental results and compared with and used as tests of the accuracy of physical models of tektite-forming impact events.