کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1674753 | 1008970 | 2007 | 5 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Dealloying of Au-Ag thin films with a composition gradient: Influence on morphology of nanoporous Au
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فناوری نانو (نانو تکنولوژی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Nanoporous Au can be formed by dealloying Au-Ag alloys and, depending on the initial alloy composition, produce a variety of microstructural features. We investigated a wide compositional range and found three regimes, based on initial Au content, that yield varying degrees of dealloying in thin films. Between 22 and 26 at.% Au, dealloying produces nearly pure Au with an open nanoporous structure. However, above 36 at.% Au, only the grain boundaries dealloy, leaving islands of retained Au-Ag alloy. For intermediate compositions, a transitional microstructure results, with final Ag concentration ranging from 50 at.% down to 4 at.%. Film cracking was observed after dealloying, and lower initial Au content correlated with a higher degree of cracking and a higher pore fraction.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Thin Solid Films - Volume 515, Issue 18, 25 June 2007, Pages 7122-7126
Journal: Thin Solid Films - Volume 515, Issue 18, 25 June 2007, Pages 7122-7126
نویسندگان
X. Lu, T.J. Balk, R. Spolenak, E. Arzt,