کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10277176 | 464272 | 2015 | 9 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Removal of para-toulic acid (p-TA) from purified terephthalic acid (PTA) waste water by electrocoagulation process
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
CCDEDXTDSTGADTAPTAAphAElectro coagulationUnited State Environmental Protection AgencyAluminum - آلومینیوم Iron - آهنAcetic acid - اسید استیکPurified terephthalic acid - اسید ترفتالاتی خالصEnergy Dispersive X-ray Spectroscopy - اشعه ماوراء بنفش اشعه ایکسAmerican Public Health Association - انجمن بهداشت عمومی آمریکاThermo gravimetric analysis - تجزیه گرما گرماسنجیanalysis of variance - تحلیل واریانسANOVA - تحلیل واریانس Analysis of varianceMin - حداقلminute - دقیقهResponse surface methodology - روش سطح پاسخRSM - روششناسی سطح پاسخcentimeter - سانتیمترfigure - شکلFig. - شکل.Central composite design - طراحی مرکب مرکزیFTIR - طیف سنج مادون قرمزFourier transform infrared spectroscopy - طیف سنجی مادون قرمز تبدیل فوریه یا طیف سنجی FTIRTotal dissolved solids - مجموع جامدات حل شدهSEM - مدل معادلات ساختاری / میکروسکوپ الکترونی روبشیEnergy consumption - مصرف انرژیMolecular weight - وزن مولکولیX-ray diffraction - پراش اشعه ایکسXRD - پراش اشعه ایکسcurrent density - چگالی جریانUSEPA - گام
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
مهندسی شیمی (عمومی)
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
Present study is based on removal of Para-Toulic Acid (p-TA) and chemical oxygen demand (COD) from purified terephthalic acid (PTA) waste water by electro coagulation process. Aluminum (Al) and iron (Fe) are selected as electrode material. A full factorial (4-factors, 5-level, 3-response) rotatable central composite design (CCD) has been developed for optimization of operating parameters. Operating parameters such as pHâ (4-12), current density (A/m2)-(76.0-215), electrolysis time (min)-(15-90), and NaCl concentration (g/l)-(0.5-1.50) are used for study for removal efficiency of p-TA (mg/l), COD (mg/l), and consumption of energy (kwh/kg COD removed). Maximum removal efficiency of p-TA-60.49, 50.76; COD-53.80, 46.75 and E. consumption-90.25, 135.50 are achieved at optimum operating conditions for Al and Fe electrodes respectively. Sludge samples obtained after EC treatment are analyzed by settling characteristics, FTIR, SEM/EDX, XRD and TGA/DTA.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Environmental Chemical Engineering - Volume 3, Issue 3, September 2015, Pages 1731-1739
Journal: Journal of Environmental Chemical Engineering - Volume 3, Issue 3, September 2015, Pages 1731-1739
نویسندگان
Krishan Kishor Garg, Basheshwar Prasad,